Gateway Motor Assisted Approach Leading to Solar Car
It is solar operated as well as electrical power operated vehicle having sitting capacity of 4 persons. It has motor of 650 KW with 4 solar panels of 80 W each and also 04 batteries of 80 Amp.
In this, we use a heat exchanger which is fitted between evaporator and compressor which is used to cool refrigerant after condensation, the ultimate effect of this is to increase the value of C.O.P.
Solar Agriculture Water Pumping System
The system is kept under the sun radiation so that the energy formed by the solar panel is stored in battery which is further utilized in pumping the water with the help of motor.
Solar Car Prototype
Solar car uses photovoltaic cells to convert solar energy into electrical energy which is converted into mechanical energy by means of D.C. motor.
Four wheel steering system
Four wheel steering system is employed in a vehicle to achieve better maneuverability at high speed, reducing the turning circle radius of the car and to reduce the driver's steering effort.
Four Step Power Generation
In this project, the pushing power is converted into electrical energy by proper drawing arrangement. This can be further used in emergency power failure situation, street lighting etc.
It is based on principle of conservation of energy and convert solar energy into electrical energy which is further into mechanical energy.
The foldable cycle is folded towards the opposite side of chain cover from the mid joint attached to the front and rear frame of bicycle. It is done to provide overall flexibility and low occupying area.
Electricity Generation Using Impulse Turbine
The turbine converts the kinetic energy of falling water into mechanical energy than a generator converts the mechanical energy from turbine into electrical energy.
This converts the power from electric motor into potential energy that can be stored in form of pressurised air such mechanism can be used in automobile manufacturing, pneumatic tools.
Folding Electric Cycle
It is designed in a compact form thus, facilitating transport and storage. Folded bike can be easily carried into building or in a public transport.
Pedal Powered Washing Machine Cum Dryer
Pedal power is the transfer of energy from via foot pedal and crank system. It helps in saving electricity and strengthens our physical energy.
Three Axis Pneumatic Tippler
This is used to unload the material anywhere about 360 degree.
Underground Lift Car Parking
To meet their design or space requirements, while still having room for their treasured automobiles, many new home builders are turning to underground garages. This car lift lowers one vehicle to a lower elevation for storage and security, while the second vehicle can be driven onto the top platform and stored at the upper level of the single-car garage.
Regenerative Braking System
A Regenerative Brake is an energy recovery mechanism which slows a vehicle or object down by converting its kinetic energy into another form, which can be either used immediately or stored until needed.
Air Compressed Car
A compressed air car is a compressed air vehicle that uses a motor powered by compressed air. The car can be powered solely by air, or combined (as in a hybrid electric vehicle) with gasoline, diesel, ethanol, or an electric plant with regenerative braking.
Power Generation Using Speed Breaker
A large amount of energy is wasted at the speed breakers, so through friction , every time a vehicle passes over it. Electricity can be generated using the vehicle weight and speed (kinetic energy) as input.
Abrasive Jet Machining
Abrasive jet machining (AJM), also known as abrasive micro-blasting, pencil blasting and micro-abrasive blasting, is an abrasive blasting machining process that uses abrasives propelled by a high velocity gas to erode material from the workpiece.